Parts Catalogue

Ventilated front brake disc for passenger vehicles. High-carbon cast iron, precision balanced.

Diameter: 312mm · Thickness: 25mm · Bolt Pattern: 5×112

Solid rear brake disc. OEM-spec dimensions for precise fitment.

Diameter: 272mm · Thickness: 10mm · Bolt Pattern: 5×112

Semi-metallic front brake pad set. Low dust, low noise formulation. Suitable for EV/HEV platforms.

Material: Semi-metallic · Shim: Included · Wear Sensor: Included

Cast iron brake drum for heavy commercial vehicles. High heat dissipation, extended service life.

Diameter: 420mm · Width: 180mm · Material: GG25

Lower control arm assembly with ball joint. Forged steel construction for durability.

Position: Front Lower · Material: Forged Steel · Ball Joint: Included

Anti-roll bar link kit. Polyurethane bushings for improved handling stability.

Length: 285mm · Thread: M12×1.5 · Bushing: Polyurethane

Complete clutch kit: disc, pressure plate, and release bearing. OEM-equivalent performance.

Diameter: 228mm · Splines: 23 · Pressure Plate: Diaphragm

Electric window regulator with motor. Direct OEM replacement, plug-and-play installation.

Position: Front Left · Drive: Electric · Motor: Included

Complete CV axle shaft assembly. Grease-packed, boot included. Ready to install.

Position: Front Right · Length: 580mm · Splines: 33/36

Heavy-duty rear propeller shaft for commercial trucks. Balanced and dynamically tested.

Length: 1450mm · Diameter: 120mm · U-Joint: Included

Full engine overhaul gasket set. Multi-layer steel head gasket included. All seals and O-rings.

Type: Full Set · Head Gasket: MLS · Material: Steel/Rubber

Complete timing chain kit: chain, tensioner, guides, and sprockets. OEM-spec stretch resistance.

Chain Links: 148 · Tensioner: Hydraulic · Guides: 2 pcs

Aluminium core radiator with plastic tanks. OEM dimensions, improved cooling efficiency.

Core Size: 650×380mm · Rows: 2 · Transmission Cooler: Yes

OEM-replacement water pump with gasket. Precision-cast impeller for optimal flow rate.

Drive: Belt · Impeller: Cast Iron · Gasket: Included

High-precision fuel injector. Ultrasonic cleaned and flow-tested. OEM flow rate specification.

Flow Rate: 440cc/min · Connector: EV1 · Spray Pattern: Multi-hole

Wideband upstream oxygen sensor. Fast light-off, accurate A/F ratio measurement.

Type: Wideband · Connector: 4-wire · Thread: M18×1.5

Active ABS wheel speed sensor. Hall-effect technology, compatible with EV/HEV platforms.

Type: Active Hall-Effect · Connector: 2-pin · Cable Length: 600mm

Permanent magnet synchronous motor for rear-axle EV drive. High efficiency, regenerative braking compatible.

Power: 150kW · Torque: 310Nm · Voltage: 400V DC

Battery management system module for HEV/PHEV platforms. Cell balancing, thermal management.

Voltage Range: 200–450V · Cells: Up to 96S · Protocol: CAN 2.0B

12V windscreen washer pump. Universal fit with multiple outlet options.

Voltage: 12V · Flow Rate: 1.2L/min · Connector: 2-pin

Hydraulic power steering rack and pinion assembly. Remanufactured to OEM specification.

Type: Hydraulic · Turns Lock-to-Lock: 3.2 · Tie Rods: Included

Direct ignition coil. High-energy output, extended service life. OEM-equivalent spark energy.

Type: COP · Primary Resistance: 0.5Ω · Secondary: 8kΩ

Multi-layer steel exhaust manifold gasket set. High-temperature resistant, OEM-spec sealing.

Material: MLS Steel · Layers: 3 · Temperature Rating: 900°C

Complete coolant hose kit. EPDM rubber construction, reinforced with polyester braid.

Material: EPDM · Pressure Rating: 3 bar · Temperature: -40°C to +150°C

Plastic intake manifold with variable geometry. OEM-spec flow characteristics.

Material: PA66-GF30 · VANOS: Compatible · EGR Port: Yes

Multi-function interior light and switch assembly. Direct OEM replacement.

Functions: 6 · Connector: 12-pin · Backlight: LED

4-button electric window master switch panel. Driver side, with child lock function.

Buttons: 4 · Child Lock: Yes · Connector: 20-pin